Dell Inspiron 16 5625 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 73

background image

4. Disconnect the I/O board cable from the I/O board.
5. Disconnect the coin-cell battery cable from the I/O board.
6. Lift the fingerprint-reader cable connector latch and disconnect the optional fingerprint-reader cable from the I/O board.
7. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
8. Lift the I/O board off the palm-rest and keyboard assembly.

Installing the I/O board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the I/O board and provides a visual representation of the installation procedure.

Steps

1. Align the screw holes on the I/O board with the screw holes on the system board and palm-rest and keyboard assembly.
2. Align the ports on the I/O board to the slots on the palm-rest and keyboard assembly.
3. Place the I/O board on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5. Connect the I/O board cable to the I/O board.
6. Close the latch and replace the clear adhesive tape.
7. Connect the coin-cell battery cable to the I/O board.
8. Connect the optional fingerprint-reader cable to the I/O board and close the latch to secure the cable.
9. Close the right-display hinge.
10. Replace the two screws (M2.5x5) that secure the right-display hinge of the display assembly to the system board.

Next steps

1. Install the

or

, whichever is applicable.

Removing and installing components

41

«
...
39
40
41
42
43
...
»

Содержание Inspiron 16 5625










































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 16 5625

THINKPAD THINKPAD A30

Бренд: IBM Страницы: 88

Бренд: J-PRO Страницы: 50

Thunderbolt Station 2

Бренд: CalDigit Страницы: 11

TravelMate P4 14

Бренд: Acer Страницы: 93

TravelMate P2 14

Бренд: Acer Страницы: 88

Бренд: Acer Страницы: 82

Бренд: Acer Страницы: 83

Бренд: Acer Страницы: 85

Бренд: Acer Страницы: 76

Бренд: Acer Страницы: 80

Бренд: Acer Страницы: 87

TravelMate P2 Series

Бренд: Acer Страницы: 57

Бренд: Acer Страницы: 87

Бренд: Acer Страницы: 78

Бренд: Dell Страницы: 190

Бренд: Dell Страницы: 101

Бренд: Dell Страницы: 63

Бренд: Dell Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды