Dell Inspiron 16 5625 Скачать руководство пользователя страница 62

Страница: 62 / 73

Table 5. System setup options—Advance menu (continued)

Advance

Power Option

Power on LID open

Controls the Power function on LID open action.

Options are:

●

Enabled (Default)

●

Disabled

Maintenance

Maintenance information.

Data Wipe on next boot

Performs Data wipe on next boot. Options are:

●

Disabled (Default)

●

Enabled

BIOS Recovery from Hard Drive

Performs reset of firmware to the factory image saved on the secondary
storage. Options are:

●

Enabled (Default)

●

Disabled

BIOS Auto Recovery

Performs auto firmware reset when corrupted BIOS is detected. Options are:

●

Disabled (Default)

●

Enabled

SupportAssist System Resolution

Onboard Diagnostics

Auto OS Recovery Threshold

Performs SupportAssist OS recovery after the set value failed boot attempts.
Options are:

●

Off

●

2 (Default)

●

Support Assist OS Recovery

Enabled Support Assist OS recovery on failed boot attempts. Options are:

●

Disabled

●

Enabled (Default)

Keyboard Illumination

Allows to Switch-on/switch-off the Keyboard backlight.

Options are:

●

Disable

●

Dim

●

Bright (Default)

Keyboard Backlight with AC

Allows to permanently turn off/turn-on the Keyboard backlight without the AC
adapter.

Options are from 5 Seconds to 15 Minutes. Default option is set to1 Minute.

Keyboard Backlight with Battery

Allows to permanently turn off/turn-on the Keyboard backlight without the AC
adapter.

Options are from 5 Seconds to 15 Minutes. Default option is set to1 Minute.

External USB Ports

Allows to turn off the External USB ports in the Operating System.

Options are:

●

Enabled (Default)

●

Disabled

Microphone

Allows to Switch-on/switch-off the microphone.

Options are:

●

Enabled (Default)

●

Disabled

BIOS setup

Содержание Inspiron 16 5625










































































Результаты поиска

Содержание Inspiron 16 5625

Отзывы:

Похожие инструкции для Inspiron 16 5625

Бренды по названию

Популярные бренды

Dell Inspiron 16 5625, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 16 5625

Отзывы:

Похожие инструкции для Inspiron 16 5625

Бренды по названию

Популярные бренды