Dell Inspiron 15 Gaming Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 112

background image

Diagnostics

Power and battery-status light/ hard-drive activity light:

Indicates the

battery-charge status or the hard-drive activity.

NOTE: Press Fn+H to toggle this light between power and battery-status
light and hard-drive activity light.

Hard-drive activity light

Turns on when the computer reads from or writes to the hard drive.

Power and battery-status light

Indicates the power and battery-charge status.

Solid white

– Power adapter is connected and the battery has more than 5

percent charge.

Amber

– Computer is running on battery and the battery has less than 5

percent charge.

Off

• Power adapter is connected and the battery is fully charged.
• Computer is running on battery and the battery has more than 5 percent

charge.

• Computer is in sleep state, hibernation, or turned off.

The power and battery-status light blinks amber along with beep codes
indicating failures.
For example, the power and battery-status light blinks amber two times
followed by a pause, and then blinks white three times followed by a pause.
This 2,3 pattern continues until the computer is turned off indicating no
memory or RAM is detected.
The following table shows different light patterns and what they indicate.

Light Pattern

Problem description

2,1

CPU failure

2,2

System board: BIOS and ROM failure

2,3

No memory or RAM detected

2,4

Memory or RAM failure

2,5

Invalid memory installed

109

«
...
107
108
109
110
111
...
»

Содержание Inspiron 15 Gaming

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 15 Gaming

Toughbook CF-29LCQGCBM

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 40

Бренд: Panasonic Страницы: 46

Toughbook CF-T7BWATZJM

Бренд: Panasonic Страницы: 44

Satellite C50-K

Бренд: dynabook Страницы: 46

Бренд: Packard Bell Страницы: 83

Бренд: Xebec Страницы: 15

Бренд: Conrad Electronic Страницы: 3

Бренд: Samsung Страницы: 34

Бренд: Samsung Страницы: 78

Бренд: Samsung Страницы: 83

Бренд: Samsung Страницы: 128

Satellite Pro S300M-W3401V

Бренд: Toshiba Страницы: 5

Satellite Pro S300M-S2142

Бренд: Toshiba Страницы: 5

Satellite Pro S300M-EZ2421

Бренд: Toshiba Страницы: 5

Satellite Pro S300-S2503

Бренд: Toshiba Страницы: 5

Satellite Pro S300-S2504

Бренд: Toshiba Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды