Removing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
NOTE: Your computer’s Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables
correctly after you replace the system board.
Prerequisites
1
Remove the
2
Remove the
3
Remove the
.
4
Remove the
.
5
Remove the
.
6
Remove the
7
Follow the procedure from step 1 to step 8 in “
”.
8
Remove the
.
Procedure
1
Remove the screw (M2x3) that secures the display-cable bracket to the
system board.
2
Lift the display-cable bracket off the system board.
3
Using the pull-tab, disconnect the display cable from the system board.
69
Содержание Inspiron 15 Gaming
