Dell Inspiron 14 5402 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 89

background image

Table 16. System setup options—Maintenance menu

Maintenance

Asset Tag

Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.

Service Tag

Displays the Service Tag of the computer.

BIOS Recovery from Hard Drive

Enables the computer to recover from a bad BIOS image, as long as the Boot
Block portion is intact and functioning.

Default: ON.

NOTE:

BIOS recovery is designed to fix the main BIOS block and cannot

work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.

BIOS Auto-Recovery

Enables the computer to automatically recover the BIOS without user actions.
This feature requires BIOS Recovery from Hard Drive to be set to Enabled.

Default: OFF.

Start Data Wipe

CAUTION:

This Secure Wipe Operation will delete information in a

way that it cannot be reconstructed.

If enabled, the BIOS will queue up a data wipe cycle for storage devices that
are connected to the motherboard on the next reboot.

Default: OFF.

Allow BIOS Downgrade

Controls flashing of the system firmware to previous revisions.

Default: ON.

Table 17. System setup options—System Logs menu

System Logs

Power Event Log

Displays Power events.

Default: Keep.

BIOS Event Log

Displays BIOS events.

Default: Keep.

Thermal Event Log

Displays Thermal events.

Default: Keep.

Table 18. System setup options—SupportAssist menu

SupportAssist

Dell Auto operating system Recovery
Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.

Default: 2.

SupportAssist operating system Recovery

Enables or disables the boot flow for SupportAssist operating system Recovery
tool in the even of certain system errors.

Default: ON.

System setup

75

«
...
73
74
75
76
77
...
»

Содержание Inspiron 14 5402


























































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 14 5402

Blade Pro RZ09-0220

Бренд: Razer Страницы: 19

Aspire 9920G Series

Бренд: Acer Страницы: 119

Бренд: Acer Страницы: 105

Бренд: Clevo Страницы: 102

Бренд: Prestigio Страницы: 12

Бренд: Prestigio Страницы: 95

Бренд: ENHANCE Страницы: 16

Бренд: Targus Страницы: 10

Бренд: Tecknet Страницы: 4

Presario 1800 - Notebook PC

Бренд: Compaq Страницы: 77

Бренд: Compaq Страницы: 122

Бренд: malata Страницы: 32

ONEBOOK FLEX 360B2

Бренд: EDUGEAR Страницы: 33

THINKPAD P/N 39T2034

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 9

Бренд: Monoprice Страницы: 3

TravelMate 3000

Бренд: Texas Instruments Страницы: 204

Бренд: Panasonic Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды