AX100-Series - Installing a Fibre Channel Storage System with a Direct Connection to a Solaris Server
47
Initializing the Storage System
8. When you have set the parameters to the values you want, apply
the values by typing
a
.
9. Exit the utility by typing
e
.
If you entered an SP IP address for the first time or changed an SP
IP address, the utility reboots the storage system and the
SP Boot/Fault light on the back of each SP starts blinking
(Figure 17). The reboot takes several minutes to complete. When
it is completed, the SP Boot/Fault light on each SP stops blinking
and remains off.
Figure 17
SP Boot/Fault and Power Supply Fault Lights (AX100 Shown)
FE 0
FE 1
FE 0
FE 1
Power
SP A Boot/Fault
Power Supply A Fault
Power Supply B Fault
SP B Boot/Fault
EMC2928d
SP B
SP A
