Dell EMC XC Core XC650, Инструкция по установке и обслуживанию

Страница: 63 / 136

Figure 45. Lift up the TIM break lever
4. Using your thumb and index finger, first hold the carrier release tab at the pin 1 connector, pull out the tip of the carrier
release tab, and then lift the carrier partially from the heat sink.
NOTE: Ensure to return the TIM break lever back to its original position.
5. Using your thumb and index finger, first hold the carrier release tab at the pin 1 connector, pull out the tip of the carrier
release tab, and then lift the carrier from the heat sink.
6. After all the corners are released from the heat sink, lift the carrier from the pin 1 corner of the heat sink.
Figure 46. Removing the processor carrier
Next steps
Replace the processor into a processor and heat sink module (PHM) .
Installing the processor
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions .
2. Follow the procedure listed in Before working inside your system .
Installing and removing system components 63