NOTE: For more information about
fwupd
commands, see
www.fwupd.org/users
.
Without an internet connection
1.
Download the latest .cab file from
secure-lvfs.rhcloud.com/lvfs/devicelist
.
2.
Check the current BIOS details.
$ sudo uefi-fw-tools.fwupdmgr get-devices
3.
Copy the firmware.cab file to /root/snap/uefi-fw-tools/common/ folder.
$ sudo cp firmware.cab /root/snap/uefi-fw-tools/common/
4.
Check the details of the BIOS from the .cab file.
$ sudo uefi-fw-tools.fwupdmgr get-details [Full path of firmware.cab]
5.
Apply the update.
$ sudo uefi-fw-tools.fwupdmgr install [Full path of firmware.cab] -v --allow-older --
allow-reinstall
6.
Check the EFI boot details.
$ sudo efibootmgr –v
7.
Restart the system.
$ sudo reboot
With an internet connection
1.
Connect and login to the Edge Gateway.
NOTE: Connect and login to the Edge Gateway with one these options:
•
Direct system configuration
(only for Edge Gateway 3003)
•
Static IP configuration
(only for Edge Gateway 3002 and 3003)
2.
Check the current BIOS details.
$sudo uefi-fw-tools.fwupdmgr get-devices
3.
Check if the update is available from LVFS service.
$sudo uefi-fw-tools.fwupdmgr refresh
4.
Download the BIOS from the
www.dell.com/support
.
$sudo uefi-fw-tools.fwupdmgr get-updates
5.
Apply the update.
$sudo uefi-fw-tools.fwupdmgr update -v --allow-older --allow-reinstall
6.
Check the EFI boot details.
$ sudo efibootmgr –v
7.
Restart the system.
$ sudo reboot
Dell Command | Configure (DCC)
Use DCC to update and configure the BIOS settings.
For more information on how to use DCC, see the DCC
Installation Guide
and
User's Guide
at
www.dell.com/
dellclientcommandsuitemanuals
.
For more information about BIOS settings on the Edge Gateway, see
Default BIOS settings
.
Edge Device Manager (EDM)
BIOS can be updated remotely through the EDM console connected to a remote system.
For more information about EDM, see
www.dell.com/support/home/us/en/19/product-support/product/wyse-cloud-client-manager/
research
.
60