manualshive.com logo in svg

Dell Edge Gateway 3001, Инструкция по установке и эксплуатации, Страница: 6 / 73

Поделиться
Скачать
Dell Edge Gateway 3001 Скачать руководство пользователя страница 6

2

System views

 

Top view

Table 1. Top view

Features

1

WLAN, Bluetooth, or GPS connector

Connect the antenna to increase the range and strength of wireless, 
Bluetooth, or satellite signals.

2

Mobile broadband antenna-connector one (3G/LTE)

Connect the mobile broadband antenna to increase the range and 
strength of mobile broadband signals.

3

ZigBee antenna connector

Connect the ZigBee antenna for intermittent data transmissions from 
a ZigBee-compliant sensor or input device.

4

Mobile broadband antenna-connector two (LTE 
Auxiliary only)

Connect the mobile broadband antenna to increase the range and 
strength of mobile broadband signals.

NOTE: Depending on the configuration ordered, some of the antenna connectors may not be present or may be capped. For more 
information about connecting antennas to the Edge Gateway, see the documentation that is shipped with the antenna.

6

Содержание Edge Gateway 3001










































































Отзывы:

Нет отзывов