Dell E76S, Инструкция по установке и обслуживанию

Страница: 113 / 187

Figure 110. Installing the BOSS S2 module blank
Next steps
Replace the BOSS S2 module .
Installing the BOSS S2 module
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure that is listed in Before working inside your system .
3. Remove the air shroud .
4. If installed, remove the front bezel .
5. Disconnect the cables connected to the system board.
Steps
1. If installed, remove the BOSS S2 module blank using a flat head screwdriver.
Figure 111. Removing the BOSS S2 module blank
2. Align the BOSS S2 module to the BOSS S2 slot on the chassis and push it into the slot.
3. Using a Phillips 2 screwdriver, secure the BOSS S2 module to the system.
Installing and removing system components 113