Troubleshooting
│
39
Common Problems
The following table contains general information about common monitor problems you
might encounter and the possible solutions
Common Symptoms What You
Experience
Possible Solutions
No Video/Power LED
off
No picture
• Ensure that the video cable connecting
the monitor and the computer is
properly connected and secure
• Verify that the power outlet is
functioning properly using any other
electrical equipment
• Ensure that the power button is
depressed fully
• Ensure that the correct input source is
selected via the
Input Source
Select
button
• Check the “Power LED Button” option
under Energy in OSD Menu
No Video/Power LED
on
No picture or no
brightness
• Increase brightness & contrast controls
via OSD
• Perform monitor self-test feature
check
• Check for bent or broken pins in the
video cable connector
• Ensure that the correct input source is
selected via the
Input Source
Select
menu
• Run the built-in diagnostics
Poor Focus
Picture is fuzzy,
blurry, or ghosting
• Perform Auto Adjust via OSD
• Adjust the Phase and Pixel Clock
controls via OSD
• Eliminate video extension cables
• Reset the monitor to
Factory Settings
• Change the video resolution to the
correct aspect ratio (16:9)
Shaky/Jittery Video
Wavy picture or fine
movement
• Perform Auto Adjust via OSD
• Adjust the Phase and Pixel Clock
controls via OSD
• Reset the monitor to
Factory Settings
• Check environmental factors
• Relocate the monitor and test in
another room