Dell DX6012S, Руководство владельца оборудования, Страница: 70 / 152

74
Installing System Components
Figure 3-5. Removing or Installing a Hard-Drive Blank
Installing a Hard-Drive Blank
Align the hard-drive blank with the drive bay and insert the blank into the
drive bay until the release lever clicks into place. See Figure 3-5.
Removing a Hot-Swap Hard Drive
1
If applicable, remove the front bezel. See "Removing the Front Bezel" on
page 69.
2
Prepare the drive for removal. Wait until the hard-drive indicators on the
drive carrier signal that the drive can be removed safely. See "Back-Panel
Features and Indicators" on page 15 .
If the drive has been online, the green activity/ fault indicator flashes as
the drive is powered down. When the drive indicators are off, the drive is
ready for removal.
3
Press the release button and open the drive carrier release handle to
release the drive. See Figure 3-6.
4
Slide the hard drive out of the drive bay.
5
Insert a drive blank in the vacated drive bay. See "Installing a Hard-Drive
Blank" on page 74.
CAUTION:
To maintain proper system cooling, all empty hard-drive bays must
have hard-drive blanks installed.
1 hard-drive blank 2 release lever
1
2
book.book Page 74 Friday, February 26, 2010 11:22 AM