Dell Dimension XPS R Series, Руководство по обслуживанию

Страница: 42 / 94

3-4 Dell Dimension XPS R xxx Systems Service Manual
Operating system
not found
Operating system can-
not be located on drive
A or C. In system setup pro-
gram, confirm that
drive A or C is properly
identified.
Parity check 1
nnnn
Parity error detected on
system bus. BIOS
attempts to locate
address and display it
(
nnnn); if BIOS cannot
locate the address, it
displays ???? instead.
Enter system setup
program and restore
original value(s).
Parity check 2
nnnn
Parity error detected on
I/O bus. BIOS attempts
to locate address and
display it (
nnnn); if BIOS
cannot locate address,
it displays ???? instead.
Enter system setup
program and restore
original value(s).
Press <F1> to
resume, <F2> to
enter Setup
Message displayed
after any recoverable
error message. Press <F1> to start
boot routine or <F2>
to enter system setup
program and change
any settings.
Press <Del> to
enter Setup
Optional message dis-
played during POST. Press <Del> to enter
system setup program.
Previous boot
incomplete -
Default
configuration
used
After unsuccessful
boot, POST loads
default values and
offers to run system
setup program. (POST
does
not input default
values to system setup
program.)
Run system setup
program and restore
original value(s). If
message reappears,
set system configura-
tion jumper to
Maintenance mode;
boot system to clear all
system setup value(s)
to their defaults.
Real-time clock
error
Real-time clock failed
BIOS test. Enter system setup
program and restore
original value(s).
Resource alloca-
tion conflict on
motherboard
System cannot config-
ure all system board
devices without a
resource conflict. Run system setup pro-
gram and resolve any
obvious resource con-
flicts; set system
configuration jumper
to Maintenance mode
and start up system to
return all system setup
settings to defaults.
7DEOH 6\VWHP 0HVVDJHV FRQWLQXHG
0HVVDJH 3UREDEOH &DXVHV &RUUHFWLYH $FWLRQ