Dell Dimension XPS 50, Справочное руководство

Страница: 168 / 196

C-8 Dell Dimension XPS Txxx and Txxxr Systems Reference and Troubleshooting Guide
Extended RAM
Failed at
offset: nnnn
Extended memory is not
working correctly or is
not configured correctly
at offset
nnnn .
If you receive this message after
making changes in the system
setup program, enter the pro-
gram and restore the original
value(s).
If the problem persists, refer to
Chapter 7, “Getting Help,” for
instructions on obtaining technical
assistance.
Failing Bits:
nnnn
nnnn is a map of the bits
at the RAM address (in
system, extended, or
shadow memory) that
failed the memory test.
Each “1” in the map indi-
cates a failed bit.
If you receive this message after
making changes in the system
setup program, enter the pro-
gram and restore the original
value(s).
If the problem persists, refer to
Chapter 7, “Getting Help,” for
instructions on obtaining technical
assistance.
Fixed Disk n
Failure
Fixed Disk
Controller
Failure
The hard-disk drive spec-
ified by
n is not working
or is not configured
correctly.
Ensure that the drive is installed
correctly in the chassis and
defined correctly in the system
setup program.
If the problem persists, refer to
“Hard-Disk Drive” in Chapter 6.
Fixed Disk n
Identified
The system’s automatic
drive-type detection fea-
ture has identified the
hard-disk drive(s). No action is necessary.
Incorrect
Drive x type
- Run SETUP
Diskette drive x is not
correctly identified in the
system setup program.
Ensure that the drive is defined
correctly in the system setup
program.
Invalid NVRAM
media type
The system is having a
problem accessing
NVRAM. Set the configuration jumper to
Maintenance mode (refer to
Table 2-2), and restart the system
to return all settings to their
defaults. If the problem persists,
refer to Chapter 7, “Getting Help,”
for instructions on obtaining tech-
nical assistance
.
'(&
# (
NOTE: The Glossary in the system Help defines abbreviations and acronyms.