Dell Dimension 2200, Руководство пользователя

Страница: 108 / 172

8-8 Dell PowerEdge 2200 Systems User’s Guide
Figure 8-11. Connecting an Optional SCSI Controller Card
5. Connect the other end of the interface cable to the
SCSI drives in the external bays.
If you have more than one SCSI device in the exter-
nal bays, you should connect the end connector on
the interface cable to the CD-ROM drive and enable
termination for the CD-ROM drive. See “SCSI Con-
figuration Guidelines” in Chapter 9 for instructions
on enabling termination.
6. Connect the two-wire cable supplied with the
SCSI controller card to the drive activity connec-
tor on the card and the hard-disk drive access
indicator connector (HDLED) on the system
board (see Figure 7-1).
7. Replace the computer cover according to the
instructions in “Replacing the Computer Cover”
in Chapter 6.
8. Reconnect your computer and peripherals to
their power sources, and turn them on.
9. Verify correct operation of your system.
Refer to the chapter titled “Running the Diskette-
Based Diagnostics” in your Diagnostics and
Troubleshooting Guide, and run the appropriate
tests in the SCSI Devices Test Group to verify that
the new SCSI controller is functioning correctly.
SCSI controller card
SCSI cable
SCSI drives in the
external bays (2)