Dell Dimension 2200, Руководство по обслуживанию

Страница: 73 / 82

System Setup Program A-7
Table A-4. Advanced Menu Categories
Category Function
Serial Port 1 Selects a unique address and interrupt request
for Serial Port 1. Options are Disabled; 3F8,
IRQ4; 3E8, IRQ4; and Auto
(
default
).
Auto
selects the next available combination.
Serial Port 2 Selects a unique address and interrupt request
for Serial Port 2. Options are Disabled; 2F8,
IRQ3; 2E8, IRQ3; and Auto (default). Auto
selects the next available combination.
Parallel Port Selects a unique address and interrupt request
for LPT Port. Options are Disabled; 378,
IRQ5; 3BC, IRQ7; 278, IRQ5; 378, IRQ7
(default); and Auto.
Auto selects the next
available combination.
Parallel Mode Controls whether system’s built-in parallel
port acts as an Output Only (AT-
compatible) (default), Bidirectional (PS/2-
compatible), or ECP (extended capabilities
port).
Diskette Controller Enables (default) or disables system’s
built-in diskette controller.
On Board SCSI Enables (default) or disables the built-in
PCI SCSI controller and determines if it is
scanned as a boot drive.
PCI Scan Sequence Determines the sequence the PCI devices
are scanned.
Use MP Specifications Configures the Multiprocessor Specifica-
tion level. The default is 1.4; however,
some operating systems use 1.1.
PS/2 Mouse Enables (default) or disables the built-in
mouse controller.