Dell Dimension 2200, Руководство по обслуживанию

Страница: 61 / 82

Removing and Replacing Parts 4-19
Figure 4-19. Microprocessor Module Retention Screws
b. Disconnect the microprocessor temperature sensor cable from the
heat sink, but not from the system board (see Figure 4-20).
Figure 4-20. Removing a Microprocessor Module From a
Retention Bracket
c. Press inwards on the microprocessor-module retention latches until
they snap into a retracted position (see Figure 4-20).
primary microprocessor-
module retention screws (2)
secondary microprocessor-
module retention screws (2)
temperature
sensor cable
microprocessor-module
retention latches (2)
heat sink