Processor
57
Replacing the Processor
CAUTION:
Ground yourself by touching an unpainted metal surface on the back of
the computer.
CAUTION:
When replacing the processor, do not touch any of the pins inside the
socket or allow any objects to fall on the pins in the socket.
1
Follow the procedures in "Before You Begin" on page 11.
2
Unpack the new processor, being careful not to touch the underside of
the processor.
CAUTION:
You must position the processor correctly in the socket to avoid
permanent damage to the processor and the computer when you turn on the
computer.
3
If the release lever on the socket is not fully extended, move it to that
position.
4
Align the pin-1 corners of the processor and socket.
CAUTION:
To avoid damage, ensure that the processor aligns properly with the
socket, and do not use excessive force when you install the processor.
1
socket
2
processor pin-1 indicator
3
processor
4
release lever
2
1
4
3
book.book Page 57 Monday, November 19, 2012 11:42 AM
Содержание Dimension 2010
