Memory Module(s)
21
5
Memory Module(s)
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
Removing Memory Module(s)
1
Follow the procedures in "Before You Begin" on page 11.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 15).
3
Locate the memory modules on the system board (see "System Board
Components" on page 8).
4
Press out the securing clip at each end of the memory module connector.
5
Grasp the memory module and pull it upwards.
If the memory module is difficult to remove, gently ease the memory
module back and forth to remove it from the connector.
1
memory module connector
2
securing clips (2)
2
1
book.book Page 21 Monday, November 19, 2012 11:42 AM
Содержание Dimension 2010
