Table 8. Power Management (continued)
Option
Description
●
LAN with PXE Boot
- A wakeup packet sent to the
system in either the S4 or S5 state, that will cause the
system to wake-up and immediately boot to PXE.
●
WLAN Only
- Allows the system to be powered on by
special WLAN signals.
This option is Disabled by default.
Block Sleep
Allows you to block entering to sleep (S3 state) in OS
environment. This option is disabled by default.
Intel Ready Mode
Allows you to enable the capability of Intel Ready Mode
Technology. This option is disabled by default.
Table 9. POST Behavior
Option
Description
Numlock LED
Allows you to enable or disable the Numlock feature when
your computer starts. This option is enabled by default.
Keyboard Errors
Allows you to enable or disable the keyboard error reporting
when the computer starts. This option is disabled by default.
Fast Boot
This option can speed up the boot process by bypassing some
compatibility steps:
●
Minimal — The system boots quickly, unless the BIOS has
been updated, memory changed, or the previous POST did
not complete.
●
Thorough — The system does not skip any steps in the
boot process.
●
Auto — This allows the operating system to control
this setting (this works only when the operating system
supports Simple Boot Flag).
This option is set to
Minimal
by default.
Table 10. Manageability
Option
Description
USB provision
This option is not selected by default.
MEBx Hotkey
This option is selected by default.
Table 11. Virtualization Support
Option
Description
Virtualization
This option specifies whether a Virtual Machine Monitor
(VMM) can utilize the additional hardware capabilities
provided by Intel® Virtualization Technology.
Enable Intel
Virtualization Technology
- This option is enabled by
default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from
utilizing the additional hardware capabilities provided by Intel®
Virtualization technology for direct I/O.
Enable VT for Direct
I/O
- This option is enabled by default.
Table 12. Maintenance
Option
Description
Service Tag
Displays the Service Tag of your computer.
72
System setup
Содержание D18M
Страница 1: ...OptiPlex XE3 Tower Service Manual Regulatory Model D18M Regulatory Type D18M005 August 2021 Rev A01 ...
Страница 23: ...c Press the blue release tab 1 and slide the optical drive out of the computer 2 Disassembly and reassembly 23 ...
Страница 43: ...5 Pull the power switch out from the computer Disassembly and reassembly 43 ...
Страница 60: ...b Slide and lift the system board away from the computer 1 2 60 Disassembly and reassembly ...