Dell D18M Скачать руководство пользователя страница 19

Страница: 19 / 81

3.5-inch hard drive

Removing 3.5–inch hard drive from the hard drive bracket

1. Follow the procedure in

Before working inside your computer

2. Remove the:

side cover

front bezel

3.5-inch hard drive assembly

3. To remove the hard drive bracket:

a. Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1].

NOTE:

Do not pull plastic tab by more than 25° to avoid damage to the tabs.

b. Pull the hard drive out of the hard drive bracket.
c. Lift the hard drive out of the hard drive bracket [2].

Installing the 3.5–inch hard drive into the hard drive bracket

1. Align the hard drive to the side of the hard drive bracket, and pull the other end tabs to insert the pins on the bracket into

the hard drive [1].

2. Insert the hard drive into the hard drive bracket and press until it clicks into place [2].
3. Install the:

3.5-inch hard drive assembly

front bezel

side cover

4. Follow the procedure in

After working inside your computer

Disassembly and reassembly

Содержание D18M


















































































Результаты поиска

Содержание D18M

Отзывы:

Dell D18M, Руководство по обслуживанию, Страница: 19 / 81

Результаты поиска

Содержание D18M

Отзывы: