Dell D13S Скачать руководство пользователя страница 82

Страница: 82 / 91

Option

Description

Default setting: Not set

System
Password

Allows you to set, change, or delete the system password.

NOTE:

Successful password changes take effect immediately.

Default setting: Not set

Internal HDD-0
Password

Allows you to set, change, or delete the password on the system's internal hard-disk drive.

NOTE:

Successful password changes take effect immediately.

Default Setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.

Default Setting: Enable Strong Password is not selected.

NOTE:

If Strong Password is enabled, the Admin and System passwords must contain at least one

uppercase character, one lowercase character and be at least 8 characters long.

Password
Configuration

Allows you to determine the minimum and maximum length of the Administrator and System passwords.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:

●

Disabled

●

Reboot bypass

Default setting: Disabled

Password
Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.

Default setting:

Allow Non-Admin Password Changes

is selected.

UEFI Capsule
Firmware Update

This option controls whether the system allows the BIOS updates through UEFI capsule update packages.
This option is disabled by default.

Non-Admin Setup
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled the setup options are locked by the admin password.

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

●

TPM On (enabled by default)

●

Clear

●

PPI Bypass for Enabled Commands

●

PPI Bypass for Disabled Commands

●

Attestation Enable (enabled by default)

●

Key Storage Enable (enabled by default)

●

SHA-256 (enabled by default)

●

Disabled

●

Enabled (enabled by default)

●

Optional hardware TPM 2.0

NOTE:

To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).

Computrace

Allows you to activate or disable the optional Computrace software The options are:

●

Deactivate

●

Disable

●

Activate

NOTE:

The Activate and Disable options will permanently activate or disable the feature and no

further changes are allowed

Default setting: Deactivate

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.

System Setup overview

Содержание D13S




























































































Результаты поиска

Содержание D13S

Отзывы:

Похожие инструкции для D13S

Бренды по названию

Популярные бренды

Dell D13S, Руководство пользователя

Результаты поиска

Содержание D13S

Отзывы:

Похожие инструкции для D13S

Бренды по названию

Популярные бренды