4. Connect the data and power cables to the optical drive.
5. Install the:
a.
b.
c.
d.
After Working Inside Your Computer
.
WLAN card
Removing the WLAN card
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
3. Perform the following steps to remove the WLAN card from the computer:
a. Remove the M2L3.5 screw to release the plastic tab that secures the WLAN card to the computer [1, 2].
b. Disconnect the WLAN cables from the connectors on the WLAN card [3].
c. Remove the WLAN card from its connector on the system board [4].
Disassembly and reassembly
33
Содержание D13S
