Dell D13S Скачать руководство пользователя страница 81

Страница: 81 / 91

Option

Description

●

Enable USB Boot Support

(default)

●

Enable Front USB Ports

(default)

●

Enable Rear USB Ports

(default)

NOTE:

USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

Front USB
Configuration

This field enables or disables the front USB configuration

●

Rear Port 1(Bottom Left): This option is enabled by default.

●

Rear Port 2 (Bottom Right): This option is enabled by default.

●

Rear Port 1 (Top Left): This option is enabled by default.

●

Rear Port 2 (Top Right): This option is enabled by default.

●

Front Port 1 (Bottom Right)* (default)

●

Front Port 2 (Bottom Left)* (default)

* denotes a USB 3.0-capable port

Rear USB
Configuration

This field enables or disables the front USB configuration

●

Front Port 1(Left): This option is enabled by default.

●

Front Port 2 (Right): This option is enabled by default.

●

Rear Port 1

●

Rear Port 2

●

Rear Port 3 (w/RJ-45)

●

Rear Port 4 (w/RJ-45)

* denotes a USB 3.0-capable port

Audio

This field enables or disables the integrated audio controller. By default, the

Enable Audio

option is

selected. The options are:

●

Enable Microphone: This option is enabled by default.

Miscellaneous
Devices

Allows you to enable or disable the following devices:

●

Enable PCI Slot

●

Enable Camera

●

Enabled Secure Digital (SD) Card (default)

●

Secure Digital (SD) Card Boot

●

Secure Digital (SD) Card Read-Only Mode

NOTE:

All devices are enabled by default.

Video screen options

Option

Description

Primary Display

This option option determines which video controller becomes the primary display when multiple
controllers are available in the system

●

Auto: This option is enabled by default.

●

Intel HD Graphics: This option is enabled by default.

Security screen options

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE:

You must set the admin password before you set the system or hard drive password. Deleting

the admin password automatically deletes the system password and the hard drive password.

NOTE:

Successful password changes take effect immediately.

System Setup overview

Содержание D13S




























































































Результаты поиска

Содержание D13S

Отзывы:

Похожие инструкции для D13S

Бренды по названию

Популярные бренды

Dell D13S, Руководство пользователя

Результаты поиска

Содержание D13S

Отзывы:

Похожие инструкции для D13S

Бренды по названию

Популярные бренды