Dell D11S Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 78

background image

Troubleshooting your computer

You can troubleshoot your computer using indicators like diagnostic lights, beep codes, and error messages during the operation
of the computer.

Topics:

•

Power-Supply Unit Built-in Self-Test

•

Diagnostic and Power LED codes

•

Power LED issue

•

Diagnostic error messages

•

Verifying system memory

•

System error messages

•

Real-Time Clock (RTC Reset)

•

Backup media and recovery options

•

WiFi power cycle

Power-Supply Unit Built-in Self-Test

Built-in Self-Test (BIST) helps determine if the power-supply unit is working. To run self-test diagnostics on the power-supply
unit of a desktop or all-in-one computer, see the knowledge base article

at

www.dell.com/support

Diagnostic and Power LED codes

Table 24. Power LED states

Power LED light status

Possible cause

Troubleshooting steps

Off

The computer is either turned
off or is not receiving power
or in Hibernation mode.

●

Re-seat the power cable
in the power connector on
the back of the computer
and the electrical outlet.

●

If the computer is plugged
into a power strip,
ensure that the power
strip is plugged into an
electrical outlet and is
turned on. Also, bypass
power protection devices,
power strips, and power
extension cables to verify
that the computer turns
on properly.

●

Ensure the electrical outlet
is working by testing it
with another device, such
as a lamp.

Solid amber / blinking amber

The second state of the LED
at power up, indicates that
the POWER_GOOD signal is
active and it is probable that
the power supply is fine.

●

Remove and reinstall any
cards.

●

Remove and reinstall
the graphics card, if
applicable.

7

64

Troubleshooting your computer

«
...
62
63
64
65
66
...
»

Содержание D11S















































































Отзывы:

Нет отзывов

Похожие инструкции для D11S

Бренд: IBM Страницы: 164

6219 - IntelliStation M - Pro

Бренд: IBM Страницы: 154

Бренд: IBM Страницы: 72

Бренд: Jason.L Страницы: 6

Бренд: IBM Страницы: 126

Бренд: iameco Страницы: 3

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 475

Бренд: Moxa Technologies Страницы: 53

Бренд: Sokkia Страницы: 60

Бренд: Sokkia Страницы: 68

Бренд: Cybernet Страницы: 47

Бренд: Shuttle Страницы: 65

All-in-one Computer

Бренд: Packard Bell Страницы: 58

Бренд: VonHaus Страницы: 12

Бренд: Daewoo Страницы: 19

Бренд: 3M Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды