Dell D11S страница 52 Скачать руководство пользователя

Страница: 52 / 78

Table 7. System Configuration (continued)

Option

Description

●

Enable Rear USB Ports

All the options are enabled by default.

Front USB Configuration

Allows you to enable or disable the front USB ports. All the
ports are enabled by default.

Rear USB Configuration

Allows you to enable or disable the back USB ports. All the
ports are enabled by default.

USB PowerShare

This option allows you to charge the external devices, such as
mobile phones, music player. This option is disabled by default.

Audio

Allows you to enable or disable the integrated audio controller.
The option

Enable Audio

is selected by default.

●

Enable Microphone

●

Enable Internal Speaker

Both the options are selected by default.

Miscellaneous

Allows you to enable or disable the various on-board devices.

●

Enable PCI Slot (default option)

●

Enable Media Card (default option)

●

Disable Media Card

Table 8. Video

Option

Description

Primary Display

Allows you to select the primary display when multiple
controllers are available in the system.

●

Auto (default)

●

Intel HD Graphics

NOTE:

If you do not select Auto, the on-board graphics

device will be present and enabled.

Table 9. Security

Option

Description

Admin Password

Allows you to set, change, and delete the admin password.

System Password

Allows you to set, change, and delete the system password.

Internal HDD-0 Password

Allows you to set, change, and delete the computer’s internal
HDD.

Internal HDD-3 Password

Allows you to set, change, and delete the computer’s internal
HDD.

NOTE:

HDD passwords are not available for PCI-e hard

drives.

Strong Password

This option lets you enable or disable strong passwords for the
system.

Password Configuration

Allows you to control the minimum and maximum number
of characters allowed for a administrative password and the
system password. The range of characters is between 4 and
32.

Password Bypass

This option lets you bypass the System (Boot) Password and
the internal HDD password prompts during a system restart.

BIOS setup

Содержание D11S















































































Результаты поиска

Содержание D11S

Отзывы:

Похожие инструкции для D11S

Бренды по названию

Популярные бренды

Dell D11S, Руководство пользователя

Результаты поиска

Содержание D11S

Отзывы:

Похожие инструкции для D11S

Бренды по названию

Популярные бренды