Dell Alienware Area-51 R5, Руководство по обслуживанию

Страница: 33 / 121

Removing the right AlienFX side-panel connector
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer . After working inside your computer, follow the instructions in After working
inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Prerequisites
1. Remove the stability foot .
2. Remove the left and right side-panels. See “ Removing the side panels ”.
Procedure
1. Lay the chassis on the left side.
2. Disconnect the right AlienFX side-panel cable that connects the right AlienFX side-panel connector to the I/O board. See “
I/O-
board components ”.
3. Remove the right AlienFX side-panel cable from the routing guides on the chassis.
4. Remove the screw (#6-32x6) that secures the right AlienFX side-panel connector assembly to the chassis.
5. Slide and remove the right AlienFX side-panel connector assembly from the chassis.
6. Remove the two screws (#6-32x6) that secure the right AlienFX side-panel connector to the bracket.
7. Remove the cable routing through the slot on the bracket and lift the right AlienFX side-panel connector off the bracket.
33