Dell Alienware Area-51 R5, Руководство по обслуживанию

Страница: 58 / 121

Replacing the wireless card
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer . After working inside your computer, follow the instructions in After working
inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1. Connect the antenna cables to the wireless card.
2. Align the notch on the wireless card with the tab on the wireless-card slot.
3. Insert the wireless card at an angle into the connector.
4. Replace the screw (M2x3) that secures the wireless card to the chassis.
A label at the tip of the antenna cables indicates the color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable sticker color
Auxiliary (1) Black
Main (2) White
Post-requisites
1. If you have multiple graphics cards, replace the graphics card. See “ Replacing multiple graphics cards ”.
2. Replace the left and right side-panels. See “ Replacing the side panels ”.
3. Replace the stability foot .
58