Dell Alienware Area-51 R5, Руководство по обслуживанию

Страница: 91 / 121

Removing the rear bezel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer . After working inside your computer, follow the instructions in After working
inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Prerequisites
1. Remove the stability foot .
2. Remove the left and right side-panels. See “ Removing the side panels ”.
3. Follow the procedure from step 1 to step 3 in Removing the handle bars to remove the rear handle bar.
Procedure
1. Disconnect the rear I/O accessibility lighting cable from the I/O board.
2. Open the securing clip which secures the rear I/O accessibility lighting cable to the chassis.
3. Remove the rear I/O accessibility lighting cable through the routing guides on the chassis.
4. Remove the rear I/O accessibility lighting cable through the slot on the chassis.
5. Open the securing clip which secures the rear I/O accessibility lighting cable to the chassis.
91