Dell Alienware Area-51 R5 Скачать руководство пользователя страница 22

Страница: 22 / 121

Removing the side panels

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working

inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Procedure

NOTE: Make sure that you remove the security cable from the security-cable slot (if applicable).

1. Remove the screw (#6-32x5.2) that secures the security-cable slot latch.

The security-cable slot latch slides to the unlocked position.

2. Lift the release panel to open the right side-panel.
3. Pull and lift the right side-panel away from the chassis.

4. Repeat the procedure from step 2 to step 3 on the left side-panel.

Содержание Alienware Area-51 R5


























































































































Результаты поиска

Содержание Alienware Area-51 R5

Отзывы:

Dell Alienware Area-51 R5, Руководство по обслуживанию, Страница: 22 / 121

Результаты поиска

Содержание Alienware Area-51 R5

Отзывы: