Dell Alienware 17 R5 Скачать руководство пользователя страница 146

Страница: 146 / 151

Enhanced Pre-Boot System Assessment

(ePSA) diagnostics

CAUTION: Use the ePSA diagnostics to test only your computer. Using

this program with other computers may cause invalid results or error

messages.

The ePSA diagnostics (also known as system diagnostics) performs a complete

check of your hardware. The ePSA is embedded with the BIOS and is launched by

the BIOS internally. The embedded system diagnostics provides a set of options for

particular devices or device groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra

information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE: Some tests for specific devices require user interaction. Always

ensure that you are present at the computer terminal when the diagnostic

tests are performed.

For more information, see

Dell EPSA Diagnostic 3.0

Running the ePSA diagnostics

Power-on the computer.

2  As the computer boots, press the F12 key as the Dell logo appears.
3  On the boot menu screen, select the Diagnostics option.
4  Click the arrow key at the bottom left corner.

Diagnostics front page is displayed.

5 Press the arrow in the lower-right corner to go to the page listing.

The items detected are listed.

6 To run a diagnostic test on a specific device, press Esc and click Yes to stop

the diagnostic test.

7 Select the device from the left pane and click Run Tests.

146

Содержание Alienware 17 R5
























































































































































Результаты поиска

Содержание Alienware 17 R5

Отзывы:

Похожие инструкции для Alienware 17 R5

Бренды по названию

Популярные бренды

Dell Alienware 17 R5, Руководство по обслуживанию

Результаты поиска

Содержание Alienware 17 R5

Отзывы:

Похожие инструкции для Alienware 17 R5

Бренды по названию

Популярные бренды