Using your printer
15
NOTE:
To avoid
smearing ink, remove
each transparency or
photo from the paper exit
tray before the next one
exits the printer.
Transparencies and
photos may require up to
15 minutes to dry.
You can load up to:
Make sure:
100 sheets of
plain
paper
The paper is designed for use with inkjet printers.
• The envelopes are loaded vertically against the right
side of the paper support.
• The stamp location is in the upper left corner.
• The envelopes are designed for use with inkjet
printers.
• You squeeze and slide the paper guide to the left edge
of the envelope (as shown).
10
envelopes
25 sheets of
labels
The labels are designed for use with inkjet printers.
10 sheets of
card
stock
• The card stock is designed for use with inkjet printers.
• The thickness does not exceed 0.025 inches.
10
greeting
cards
,
index
cards
,
postcards
, or
photo
cards
The cards are loaded vertically against the right side of
the paper support.
25 sheets of
coated
,
photo
, or
glossy
paper
The glossy or coated side faces you.
10
transparencies
• The transparencies are designed for use with inkjet
printers.
• The rough side faces you.
100 sheets of
custom
size
paper
Your paper size fits within these dimensions:
Width
– 76 to 216 mm
– 3.0 to 8.5 in.
Length
– 127 to 432 mm
– 5.0 to 17.0 in.
25
iron-on
transfers
• You follow the loading instructions on the iron-on
packaging.
• The blank side faces you.
20 sheets of
banner
paper
The banner paper is designed for use with inkjet printers.
