Dell 5324 - PowerConnect Switch, Справочное руководство по интерфейсу командной строки

Страница: 323 / 388

System Management
323
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
1
Open telnet session from PC 5324 to other device.
2
In the other device syntax, press Cntrl-shift-t-X
3
Enter the command show session . The number of sessions opened from PC 5324 is displayed.
4
Enter the command resume [number of session] to return to the relevant telnet session.
Examples
The following table describes the significant fields shown in the display:
show system
The show system User EXEC mode command displays system information.
Syntax
show system
Console> show sessions
Connecti
on
Host Address Port Byte
-------- -------------- -------- ----- ----
1 Remote device 172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8
Field Description
Connection Connection number
Host Remote host to which the device is connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to see on the connection.