manualshive.com logo in svg

Dell 5324 - PowerConnect Switch, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell 5324 - PowerConnect Switch Скачать руководство пользователя страница 251

SNMP Commands

251

Example

The following example configures a new SNMP Version 3 use

r.

snmp-server v3-host

The

 snmp-server v3-host 

Global Configuration mode command specifies the recipient of Simple 

Network Management Protocol Version 3 notifications. To remove the specified host, use the 

no 

form of this command.

Syntax

snmp-server v3-host {

ip-address

 | 

hostname

} 

username

 [traps | informs] {noauth | auth | 

priv} [udp-port 

port

] [filter 

filtername

] [timeout 

seconds

] [retries 

retries

]

no snmp-server host {

ip-address

 | 

hostname

} 

username 

[traps | informs]

•

 

ip-address

—Specifies the IP address of the host (targeted recipient). 

•

hostname

—Specifies the name of the host. (Range:1-158 characters).

•

username

—Specifies the name of the user to use to generate the notification. (Range: 1-

24)

•

traps 

— Indicates that SNMP traps are sent to this host.

•

informs 

— Indicates that SNMP informs are sent to this host.

•

noauth 

— Indicates no authentication of a packet.

•

auth 

— Indicates authentication of a packet without encrypting it.

•

priv 

— Indicates authentication of a packet with encryption.

•

port 

— Specifies the UDP port of the host to use. If unspecified, the default UDP port 

number is 162. 
(Range: 1-65535)

•

filtername 

— Specifies a string that defines the filter for this host. If unspecified, nothing 

is filtered. 
(Range: 1-30 characters)

•

seconds 

— Specifies the number of seconds to wait for an acknowledgment before 

resending informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-
300)

•

retries 

— Specifies the maximum number of times to resend an inform request. If 

unspecified, the default maximum number of retries is 3. (Range: 1-255)

Default Setting

This command has no default configuration.

Console (config)

# snmp-server user

Содержание 5324 - PowerConnect Switch





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды