manualshive.com logo in svg

Dell 5324 - PowerConnect Switch, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell 5324 - PowerConnect Switch Скачать руководство пользователя страница 110

110

Configuration and Image Files

www

.dell.com | support.dell.com

Default Configuration

This command has no default configuration.

Command Mode

Privileged

 

EXEC mode

User Guidelines

•

The location of a file system dictates the format of the source or destination URL.

•

The entire copying process may take several minutes and differs from protocol to protocol 
and from network to network.

Understanding Invalid Combinations of Source and Destination

Some invalid combinations of source and destination exist. Specifically, the following cannot 
be copied:

•

If the source file and destination file are the same file.

•

xmodem

 cannot be a destination.

 

Can only be copied to 

image

, 

boot

 and 

null

.

•

tftp

 cannot be the source and destination on the same copy.

•

Active Image is the image the system currently boots from (see "show bootvar" 
command) or set to boot next from. Non active image is the spare image location.

Keyword

Source or destination

flash

Source or destination URL for Flash memory. It’s the default in case a 
URL is specified without a prefix

running-config

Represents the current running configuration file.

startup-config

Represents the startup configuration file.

backup-config

Represents the backup configuration file.

image

If source file, represent the active image file. If destination file, represent 
the non-active image file.

boot

Boot file. 

tftp:

Source or destination URL for a TFTP network server. The syntax for 
this alias is tftp://host/[directory]/filename. The host can be either IP 
address or hostname. 

xmodem:

Source for the file from a serial connection that uses the Xmodem proto-
col.

null:

Null destination for copies or files. A remote file can be copied to null to 
determine its size.

Содержание 5324 - PowerConnect Switch





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды