manualshive.com logo in svg

Dell 5324 - PowerConnect Switch, Справочное руководство по интерфейсу командной строки

Поделиться
Скачать
Dell 5324 - PowerConnect Switch Скачать руководство пользователя страница 227

RMON Commands

227

rmon collection history

The 

rmon collection history

 Interface Configuration mode command enables a Remote 

Monitoring (RMON) MIB history statistics group on an interface. To remove a specified RMON 
history statistics group, use the 

no

 form of this command.

Syntax

rmon

 

collection history

 

index

 [

owner

 

ownername

] [

buckets

 

bucket-number

] [

interval

 

seconds

]

no rmon collection history

 

index

•

index

—The requested statistics index group. (Range: 1 - 65535)

•

owner

 

ownername

—Records the RMON statistics group owner name. If unspecified, the 

name is an empty string. 

•

buckets

 

bucket-number

—A value associated with the number of buckets specified for the 

RMON collection history group of statistics. If unspecified, defaults to 50. 
(Range: 1 - 65535)

•

interval

 

seconds

—The number of seconds in each polling cycle. If unspecified, defaults to 

1800. (Range: 1 - 3600)

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

•

This command cannot be executed on multiple ports using the 

interface range ethernet

 

command.

256 to 511 Octets

The total number of packets (including bad packets) received that are 
between 256 and 511 octets in length inclusive (excluding framing bits but 
including FCS octets).

512 to 1023 Octets

The total number of packets (including bad packets) received that are 
between 512 and 1023 octets in length inclusive (excluding framing bits but 
including FCS octets).

1024 to 1518 Octets

The total number of packets (including bad packets) received that are 
between 1024 and 1518 octets in length inclusive (excluding framing bits but 
including FCS octets).

Содержание 5324 - PowerConnect Switch





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды