Dell 5324 - PowerConnect Switch, Справочное руководство по интерфейсу командной строки

Страница: 242 / 388

242
SNMP Commands
www
.dell.com | support.dell.com
2
Map the internal security-name for SNMPv1 and SNMPv2 security models to an internal
group-name.
3
Map the internal group-name for SNMPv1 and SNMPv2 security models to view-name
(read-view and notify-view always, and for rw for write-view also)
• You can use the group-name to restrict the access rights of a community string.
By specifying the group-name parameter the software:
1
Generates an internal security-name.
2
Map the internal security-name for SNMPv1 and SNMPv2 security models to the group-
name
.
Examples
The following example sets up the community access string "public" to permit administrative
access to SNMP protocol, at an administrative station with the IP address 192.168.1.20.
snmp-server view
To create or update a view entry, use the snmp-server view global configuration command. To
remove the specified Simple Network Management Protocol (SNMP) server view entry, use the no
form of this command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view view-name [ oid-tree ]
•
view-name
— Label for the view record that you are updating or creating. The name is
used to reference the record. (Range:1 - 30 chars)
• oid-tree — Object identifier of the ASN.1 subtree to be included or excluded from the
view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4 ,
or a word, such as system . Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example 1.3.*.4.
• included — The view type is included.
• excluded — The view type is excluded.
Default Setting
"Default" and "DefaultSuper" views exists.
Command Mode
Global configuration
Console (config)# snmp-server community public su 192.168.1.20