background image

considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as 
separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must 
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who 
wrote it. 

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to 
control the distribution of derivative or collective works based on the Library. 

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage 
or distribution medium does not bring the other work under the scope of this License. 

3.

You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must 
alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a 
newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not 
make any other change in these notices. 
 

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and 
derivative works made from that copy. 

This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 

4.

You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 
and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the 
terms of Sections 1 and 2 above on a medium customarily used for software interchange. 
 

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from 
the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the 
object code. 

5.

A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called 
a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. 
 

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of 
the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of 
such executables. 

When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of 
the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is 
itself a library. The threshold for this to be true is not precisely defined by law. 

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less 
in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code 
plus portions of the Library will still fall under Section 6. Otherwise, if the work is a derivative of the Library, you may distribute the object code for the 
work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the 
Library itself. 

6.

As an exception to the Sections above, you may also compile or link a "work that uses the Library" with the Library to produce a work containing 
portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's 
own use and reverse engineering for debugging such modifications. 
 

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You 
must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among 
them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: 

a.

 

Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in 

the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete 
machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to 
produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the 
Library will not necessarily be able to recompile the application to use the modified definitions.)  
 

b.

 

Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for 

a charge no more than the cost of performing this distribution. 
 

c.

 

If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified 

materials from the same place. 
 

d.

 

Verify that the user has already received a copy of these materials or that you have already sent this user a copy. 

 

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the 
executable from it. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source 
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component 
itself accompanies the executable. 

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating 
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 

7.

You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by 
this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library 
facilities is otherwise permitted, and provided that you do these two things: 
 

a.

 

Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be 

distributed under the terms of the Sections above.  
 

b.

 

Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the 

accompanying uncombined form of the same work. 
 

8.

You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, 
modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have 
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 
 

9.

You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library 
or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any 
work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying 
the Library or works based on it. 
 

Содержание 5210n Mono Laser Printer























































































































































Отзывы: