Dell 3000cn Color Laser Printer, Руководство пользователя

Страница: 57 / 194

Selecting Paper
Proper paper selection helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
Always use new, undamaged paper.
Before loading the paper, identify the recommended print side of the paper. This information is usually indicated on the
paper package.
Do not use paper that you have cut or trimmed yourself.
Do not mix print media sizes, weights, or types in the same source. This may result in a paper jam.
Do not remove trays while a job is printing or
Printing
is displayed on the operator panel.
Make sure the
Paper Type
and
Paper Size
settings are correct. (See " Tray Settings " for detailed information about
these settings.)
Make sure the paper is properly loaded in the tray.
Flex paper back and forth, and then fan them. Straighten the edges of the stack on a level surface.
When curl is excessive, with plain paper, turn it over and reset it.
Selecting Preprinted Forms and Letterhead
When selecting preprinted forms and letterhead paper for the printer:
Use long grain paper for best results.
Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Select papers that absorb ink, but do not bleed.
Avoid papers with rough or heavily textured surfaces.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand
temperatures of 225°C (437°F) without melting or releasing hazardous emissions.
Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidation-set or oil-based
should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.
Printing on Letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead you have selected is acceptable for