Dell 3000cn Color Laser Printer Скачать руководство пользователя страница 68

Страница: 68 / 194

5. Make sure the size and type settings for the multipurpose feeder are set to the correct value for the print media you

have loaded.

6. Select print media source, size, and type in your software program and select the print media size and type on the

printer operator panel.

Loading Envelopes

To load envelopes that are under 8.66 inches (220 mm) in width, insert the envelopes with the flaps open and toward the

front of the printer, with the recommended print side face up.

To load envelopes that are over 8.66 inches (220 mm) in width, insert the envelopes with the flaps closed and the short-edge

of the envelopes facing into the printer, with the recommended print side face up.

You can load envelopes up to the maximum fill line in the tray at one time.

NOTE:

Make sure set the envelope flaps are completely unfolded.

NOTICE:

Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and

damage to the printer.

Using the Multipurpose Feeder

Содержание 3000cn Color Laser Printer



































































































































































































Результаты поиска

Содержание 3000cn Color Laser Printer

Отзывы:

Dell 3000cn Color Laser Printer, Руководство пользователя, Страница: 68 / 194

Результаты поиска

Содержание 3000cn Color Laser Printer

Отзывы: