Dell 210-APGV, Руководство по установке операционной системы

Страница: 25 / 78

firmware_updater/diag/zlib1g-dev_1%3a1.2.8.dfsg-2+b1_amd64.deb
firmware_updater/diag/libssl-doc_1.0.1t-1+deb8u6_all.deb
firmware_updater/Yafuflash
~/UFW/temp ~/UFW/temp
Package version: x.x
Packaged images:
BMC image: x.x
BIOS image: x.xx.x.x-xx
CPLD image: XxXX
Wifi CPLD image: XxX
Note:If BMC version is less than 1.23 CPLD versions will not be shown correctly
1. Automatically update all firmware components
2. BMC image[Primary version:x.x, backup version:1.23]
3. BIOS image[Booted version: x.xx.x.x-xx]
4. CPLD image[CPLD version: XxXX]
5. rNDC left CPLD image[CPLD version: XxX]
6. rNDC right CPLD image[CPLD version: XxX]
q. Exit
4. Select the appropriate number of your choice to upgrade the firmware.
Enter your choice:1
updating ALL images
updating BMC image
****************************
* BMC version = 1.23 *
* Back-up Version = 2.0 *
****************************
updating primary image only..
INFO: Yafu INI Configuration File not found... Default options will not be applied...
Creating IPMI session via network with address xxx.xx.xxx.xxx...Done
Continuing with Full Firmware Update
****************************************************************************
WARNING!
FIRMWARE UPGRADE MUST NOT BE INTERRUPTED ONCE IT IS STARTED.
PLEASE DO NOT USE THIS FLASH TOOL FROM THE REDIRECTION CONSOLE.
****************************************************************************
Preserving Env Variables... done
Uploading Firmware Image : 100%... done
Uploading Firmware Image : 100%... done
Flashing [boot] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [conf] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [root] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [osimage] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [www] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [testapps] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Flashing [ast2500e] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Setting Env variables... done
Resetting the firmware..........
Done with updating image
Upgrade Firmware through BMC 25