Dell 1081AD Скачать руководство пользователя страница 29

Страница: 29 / 140

Installation

xxx

(Optional) Assemble the blanking panel to the rails on the front side of the
rack and tighten the thumbscrews (item 3).

To remove the switch from the rack:

Unscrew the thumbscrews and pull the switch assembly out of the rack until
the travel stops are reached. The travel stop position is intended to provide
the opportunity to reposition the rail grip; it is not intended for service.

Locate the blue tabs on the sides of the switch rails (item 4).

Push the tabs inward and continue pulling the assembly until the switch
rails are clear of the ReadyRails assemblies.

1U Front-rack Installation

Before installation, the rails that are attached to the switch must be re-
configured.

On each switch rail, lift the tab under the front standoff and slide the rail
forward as you lift the rail from the switch (Figure 2.6, item 1).

Содержание 1081AD













































































































































Результаты поиска

Содержание 1081AD

Отзывы:

Бренды по названию

Популярные бренды

Dell 1081AD, Руководство пользователя

Результаты поиска

Содержание 1081AD

Отзывы:

Бренды по названию

Популярные бренды