Dell EMC Storage NX3230, Руководство пользователя

Страница: 72 / 138

2. Press tab A and rotate the latch clockwise.
3. Press tab B and rotate the latch down.
4. Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion card connector.
5. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
6. Close the latches of tab A and tab B.
圖
25. Installing an expansion card into the expansion card riser 1
1. tab A 2. expansion card riser 1 cage
3. expansion card connector 4. tab B
5. latch 6. expansion card
後續步驟
1. Install the expansion card riser.
2. If applicable, connect any cables to the expansion card.
3. Follow the procedure listed in the After working inside your system section.
4. Install any device drivers required for the card as described in the documentation for the card.
相關工作
Before working inside your system
After working inside your system
相關參考
安全說明
Removing the riser 1 blank
事前準備作業
警示
:
許多維修僅可由獲得認可的維修技術人員來完成。 您 只能依照 產 品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨 產 品寄送的安
全指示。
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in Before working inside your system section in this document.
3. Remove the expansion card riser.
72 Installing and removing system components