Dell EMC Storage NX3230, Руководство пользователя

Страница: 59 / 138

Installing a hot swappable hard drive
事前準備作業
警示
:
許多維修僅可由獲得認可的維修技術人員來完成。 您 只能依照 產 品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨 產 品寄送的安
全指示。
警示
: Use only hard drives that have been tested and approved for use with the hard drive backplane.
警示
: Combining SAS and SATA hard drives in the same RAID volume is not supported.
警示
: When installing a hard drive, ensure that the adjacent drives are fully installed. Inserting a hard drive carrier and
attempting to lock its handle next to a partially installed carrier can damage the partially installed carrier's shield spring
and make it unusable.
警示
:
為 避免資料遺失，請確定 您 的作業系統支援熱 插 拔磁碟機安裝，請參閱作業系統隨附的說明文件。
警示
:
安裝好更換用的的熱 插 拔硬碟並開 啟 系統電源後，硬碟將自動開始重建。務必確認更換的硬碟 為 完全空白，或其中的資料
為 可覆寫，因 為 在硬碟安裝後，其中的任何資料會立即遺失。
1. Follow the safety guidelines listed in Safety instructions section.
步驟
1. If a hard drive blank is installed in the hard drive slot, remove it.
2. Install a hard drive in the hard drive carrier. For more information, see the Installing a hot swappable hard drive into a hot swappable
hard drive carrier section.
3. Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4. Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
5. Close the hard drive carrier handle to lock the hard drive in place.
後續步驟
Install the optional front bezel.
圖
16. Installing a hot swappable hard drive
1. release button
2. hard drive or SSD carrier
3. hard drive or SSD carrier handle
Installing and removing system components 59