Dell EMC Storage NX3230, Руководство пользователя

Страница: 101 / 138

Replacing system battery
事前準備作業
1. Follow the safety guidelines listed in the Safety instruction section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
註
:
如果新電池安裝不正確，可能會有爆炸的危險。請僅以相同或由製造廠商推薦的同類型電池來更換原有的電池。如需更多資
訊，請參閱系統隨附的安全資訊。
警示
:
許多維修僅可由獲得認可的維修技術人員來完成。 您 只能依照 產 品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨 產 品寄送的安
全指示。
步驟
1. Locate the battery socket. For more information, see the System Board Connectors section.
警示
:
為 避免損壞電池連接器，安裝或卸下電池時，必須穩固地固定連接器。
2. Place your finger between the securing tabs at the negative side of the battery connector and lift the battery out of the socket.
圖
51. Removing system battery
a. Positive side of the battery connector
b. System battery
c. Negative side of the battery connector
3. To install a new system battery, hold the battery with the "+" facing up and slide it under the securing tabs.
4. Press the battery into the connector until it snaps into place.
圖
52. Installing system battery
a. System battery
b. Positive side of the battery connector
後續步驟
1. Install the cooling shroud.
2. Follow the procedure listed in the After working inside your system section.
Installing and removing system components 101