Figure 16. Installing the bezel filter
Next steps
1
Follow the procedure listed in
After working inside your system
.
2
If applicable,
to the system.
System cover
System cover provides security for the entire system and also helps in maintaining proper air flow inside the system.
Removing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
Steps
1
Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock counter clockwise to the unlocked position.
2
Loosen the two captive screws on the top of the system cover.
3
Loosen the thumb screw that secures the back of the system cover to the chassis.
NOTE:
Ensure that the three screws are loosened before lifting the latch to avoid damage to the system cover.
4
Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system.
5
Hold the cover on both sides, and lift the cover away from the system.
58
Installing and removing system components
