Left control panel view
Figure 3. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 2. Left control panel
Item
Indicator, button, or
connector
Icon
Description
1
Status LED indicators
N/A
Indicate the status of the system. For more information, see the
Status LED indicators section.
2
System health and system
ID indicator
Indicates the system health. For more information, see the System
health and system ID indicator codes section.
3
iDRAC Quick Sync 2
wireless indicator (optional)
NOTE:
iDRAC Quick
Sync 2 wireless
indicator is available
only on certain
configurations.
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote Access
Controller User's Guide at
Dell.com/idracmanuals
.
Status LED indicators
NOTE:
The indicators display solid amber if any error occurs.
Table 3. Status LED indicators and descriptions
Icon
Description
Condition
Corrective action
Drive indicator
The indicator turns solid amber if
there is a drive error.
•
Check the System Event Log to determine if the drive
has an error.
•
Run the appropriate Online Diagnostics test. Restart
the system and run embedded diagnostics (ePSA).
10
Dell EMC PowerEdge XR2 overview
