Figure 25. Installing the air shroud
Next steps
1
2
Follow the procedure listed in
Before working inside your system
.
Intrusion switch
Removing the intrusion switch
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Keep the plastic scribe ready.
Steps
1
Disconnect the intrusion switch cable connector from the system board.
NOTE:
Observe the routing of the cable as you remove it from the system. Route the cable properly when you replace it to
prevent the cable from being pinched or crimped.
2
Using the plastic scribe, slide the intrusion switch out of the intrusion switch slot.
Installing and removing system components
53
