Figure 68. Applying thermal grease on top of the processor
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and contaminating the
processor socket.
NOTE:
The thermal grease syringe is intended for one-time use only. Dispose of the syringe after you use it.
3
Align the screws on the heat sink with the standoffs on the system board.
CAUTION:
When installing the heat sink, ensure that the airflow arrow is pointed towards the rear of the
system.
4
Use a Phillips #2 screwdriver to tighten the screws to secure the heat sink to the system board.
a Tighten the first screw three turns.
b Tighten the screw diagonally opposite to the screw you tightened.
c Return to the first screw and tighten it completely.
5
Repeat the procedure for the remaining screws.
Installing and removing system components
95
