Figure 52. Installing the rear drive backplane
Next steps
1.
2. Connect all the cables to the backplane.
3.
in their original location.
4. Follow the procedure listed in
After working inside your system
Rear drive cage
Removing the rear drive cage
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Before working inside your system
on page 44.
3.
4.
Steps
1. Using a Phillips #2 screwdriver, loosen the captive screws that secure the rear drive cage to the system.
2. Slide the rear drive cage towards the front of the system to disengage it from the system.
3. Remove the rear drive cage from the system.
72
Installing and removing system components
